Common Problems

One-stop Solution for Valve Products

Advantages and disadvantages of gate valves


Release time:

Aug 01,2024

The opening and closing member of the gate valve is the gate, which is driven by the valve stem, along the valve seat (sealing surface) to do linear lift movement of the valve. In general, the gate valve cannot be used to regulate the flow, can only be used as a cut-off device, either completely open or completely closed. In various types of valves, gate valves are one of the most widely used. Both for normal temperature and normal pressure conditions, but also for high temperature and low temperature and high pressure and lower pressure conditions, and can be used in a variety of different media through the selection of different materials.

Gate valves have the following advantages:

① Fluid resistance is small. Gate valve body inside the media channel is straight through, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.

② structure length (the distance between the two end faces connected to the pipeline) is small. As the gate is disc-shaped, is placed vertically in the valve body, so it can be designed into a smaller structure length.

③ The opening and closing are less labor-intensive. Open and close the gate movement direction perpendicular to the direction of flow of media, and globe valve flap is usually closed in the direction of movement and the valve seat in the direction of the opposite direction of the flow of media, and therefore must overcome the force of the medium. So compared with the globe valve, gate valve opening and closing is more energy-saving.

④Medium flow direction is not restricted. Medium can flow through the gate valve from any direction on both sides of the gate valve, can achieve the purpose of connecting or disconnecting. Easy to install, suitable for media flow direction may change the pipeline.

⑤ When fully open, the sealing surface by the working medium of the erosion is very small.

⑥ shape structure is relatively simple, manufacturing process is better.

At the same time, the gate valve also has some disadvantages as follows:

① sealing surface is easy to produce abrasion. When opening and closing the gate and seat contact between the two sealing surfaces have relative sliding, in the medium under the action of the thrust is easy to produce abrasion, thereby damaging the sealing performance, affecting the service life.

② more parts, more complex structure, manufacturing and maintenance are more difficult, compared with the high cost of globe valve.

③ External dimensions and opening height are larger, the space required for installation is also larger.

④ general gate valve have two sealing vice, to the processing, grinding and maintenance increased some difficulties.

⑤ The operation stroke is large and the opening and closing time is long. Due to the need to open the gate completely lifted to the valve seat above the channel, and need to close all the gate fall blocking the valve seat channel, so the gate opening and closing stroke is very large, opening and closing time is longer.

 

 

If there is any infringement, please contact to delete

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: