Zhengzhou Success Machinery Co.,ltd - Professional valve manufacturer
News Events
Latest News
Long Pipeline Valve Selection Analysis
Release time:
Aug 22,2025
The selection of valves for long-distance pipelines (oil, natural gas, water, etc.) is a critical task that directly affects pipeline safety, reliability, operational efficiency, maintenance costs, and total life cycle costs. Improper selection may result in leaks, operational difficulties, premature failure, inability to pass pigging tools, or even catastrophic accidents.
Long Pipeline Valve Selection Analysis
Analysis of Common Valve Types and Their Applicability in Long-Distance Pipelines
一. Fully welded ball valve: The absolute mainstream choice, especially for main line shut-off valves.
Advantages:
◆ Full bore design, minimal flow resistance, and smooth pipeline cleaning.
◆ Excellent bidirectional sealing performance (can achieve zero leakage).
◆ Relatively low operating torque, quick opening and closing (90-degree rotation).
◆Fully welded valve body structure, high strength, no external leakage points, particularly suitable for underground installation.
◆Mature and reliable fire-resistant design.
◆Relatively low maintenance requirements (especially for underground maintenance-free designs).
Disadvantages:
◆Relatively high cost.
◆Not suitable for precise throttling regulation (prone to cavitation damage).
◆Liquid may accumulate in the valve cavity (requires self-draining design or grease sealing).
◆Key points: Must select a fully welded valve body that complies with API 6D, fireproof design, blowout-proof valve stem, double block and bleed function, and a suitable actuator (mainly pneumatic-hydraulic linkage).
二. Gate Valves: A traditional choice, gate valves are now gradually being replaced by ball valves in mainline applications, but they are still used in stations (especially for large diameters and low pressures).
Advantages:
◆ Full-bore design (parallel gate plate).
◆ Low flow resistance.
◆ Relatively simple structure.
Disadvantages:
◆ Long opening and closing time, high operating torque (especially for large diameters and high pressures).
◆ The valve seat sealing surface is prone to erosion and wear during opening and closing.
◆ The valve cavity is prone to liquid accumulation and scaling, which may cause corrosion or freezing in winter.
◆ High height, requiring ample installation space.
◆Relatively more external leakage points (packing gland, flange/valve cover connections).
◆ Fire resistance is less reliable than ball valves (poor metal sealing performance after soft seal failure).
◆Suitable for: large-diameter pipelines in stations where operation is infrequent and strict requirements for closing time are not imposed. Not recommended for main cutoff valves on trunk lines.
三.Plug valve: Used in specific fields (such as media containing solid particles), but not as mainstream as ball valves.
Advantages:
◆Full bore.
◆Quick opening and closing (90-degree rotation).
◆Lubricated design suitable for media containing particles.
Disadvantages:
◆Typically requires regular lubrication maintenance to maintain sealing and lubrication.
◆Operating torque may be high (especially for large diameters).
◆Fire-resistant design is less mature and widespread compared to ball valves.
◆Higher cost.
◆Applications: Media with high levels of impurities, such as oil with contaminants or slurry pipelines.
四.Check Valve: Prevents backflow of the medium (pump/compressor outlet, branch inlet)
Types:
◆ Swing type: Widely applicable, commonly used for large diameters. Note the impact of water hammer.
◆Axial flow type: Low flow resistance, smooth and rapid closure, minimal water hammer effect, suitable for high-speed flow and applications with high backflow prevention requirements (e.g., compressor outlet), recommended choice.
◆Double plate/clamp type: Compact structure, lightweight, commonly used for medium and small diameters.
◆Key points: Select a type with rapid, smooth closure and low water hammer effect (axial flow type is optimal), material and sealing must meet medium requirements.
五. Globe valves: Mainly used for precise flow or pressure regulation and venting/drainage of small-diameter pipelines within stations.
◆Advantages: Good regulation performance.
◆Disadvantages: High flow resistance, non-full bore, not suitable for pipeline cleaning. Never used on main lines.
六. Butterfly Valves: Primarily used for large-diameter, low-pressure pipelines within stations that require regulation or frequent operation for water or low-pressure gas.
◆Advantages: Compact structure, lightweight, low cost, and fast opening/closing.
◆Disadvantages: Limited by structure, typically cannot achieve zero leakage (even with a triple-offset design), restricted pressure ratings and temperature ranges, lower seal reliability than ball valves, unsuitable as main shut-off valves. Not recommended for high-pressure oil and gas trunk line shut-off.
七. Safety Valves/Relief Valves:
◆Overpressure protection. Selection must be based on precise calculations of discharge capacity, set pressure, backpressure, etc.
keywords
Follow Us
Zhengzhou Success Machinery Co.,ltd
TEL:+8618595868771
E-mail:sales@successmach.com
Address:98-1 Dengfeng Road, Shangjie District, Zhengzhou City, Henan Province