News Center

One-stop Solution for Valve Products

What are the ways of connecting valves and pipelines


Release time:

May 10,2024

Common valve connections include: flange connection, clamp connection, welded connection, threaded connection, ferrule connection, grooved connection and other connection forms.

What are the ways of connecting valves and pipelines ?

   Common valve connections include: flange connection, clamp connection, welded connection, threaded connection, ferrule connection, grooved connection and other connection forms.

Flange Connection

   Flange connection is a valve body with flanges at both ends, corresponding to the flanges on the pipeline, and installed in the pipeline by bolting the flanges. Flange connection is the most used form of connection in valves.

Clamp Connection

   Valve installed in the middle of the two flanges, the valve body usually has positioning holes to facilitate the installation of positioning, with bolts directly to the valve and the two ends of the pipeline through the clamp together in the form of connection。

Welded Connection

    Butt-welding connection: Both ends of the valve body are processed into butt-welding bevels according to butt-welding welding requirements, corresponding to the welding bevels of the pipeline, and fixed on the pipeline by welding.
   Socket welding connection: Both ends of the valve body are processed according to the requirements of socket welding, and connected with the pipeline through socket welding.


Threaded Connection

   Threaded connection is an easy connection method, commonly used for small valves. The valve body is processed according to each thread standard, and there are two kinds of internal threads and external threads.

   Threaded connection is divided into two cases:

   Direct sealing: internal and external threads directly play a sealing role.
   Indirect sealing: The force of thread tightening is transmitted to the washer between the two planes, allowing the washer to play a sealing role.

Ferrule Connection

   Its connection and sealing principle is that when the nut is tightened, the ferrule is pressurized so that its edge bites into the outer wall of the tube, and the outer tapered surface of the ferrule and the tapered surface of the connector body are closed under pressure, thus reliably preventing leakage.

Grooved Connection

   This is a quick-connect method that requires only two bolts and is suitable for low-pressure valves that are frequently disassembled.

   Valve connection in the form of many more, a variety of connections are required to refer to the appropriate standards, the need for a clear understanding of the standards required by the user to avoid the selection of the valve can not be installed.

keywords