Common Problems

One-stop Solution for Valve Products

How to Determine Whether The Valve Is Internal Leakage or External Leakage


Release time:

Sep 09,2024

Daily use of valves, often encounter a variety of failures, valve leakage is one of the most common of the many failures, and the leakage of the valve is generally internal and external leakage of two cases! So, how is the difference between the two?

The internal leakage of the valve generally refers to the fact that when the valve is completely closed, there is still a medium outflow, leakage or drip from the outlet of the flow path of the valve. In terms of popular points, it is not strictly closed and sealed! The cause of the fault is usually due to the erosion and wear of the medium, or impurities and other reasons. Even if the valve stem is tightened in place, media can flow through because there is still a gap between the valve core and the valve body.

The external leakage of the valve generally refers to when the valve is completely closed or opened, the external sealing components of the valve packing, the leakage of the medium. That is, between the valve and the connecting flange or the connecting thread, the sealing is not strict, which leads to the flow of the medium out of the connecting sealing surface, or the medium leakage caused by the lax sealing between the stem and the packing gland, or the external leakage caused by the sand hole on the valve body blank, and the external leakage caused by the wear of the valve body due to the erosion of the medium.

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: