Common Problems

One-stop Solution for Valve Products

Characteristics of The Valve Manufacturing Process


Release time:

Aug 22,2024

Valve manufacturing process has the complexity and high technical difficulty. On the surface, the number of valve parts is not much, the structure is simple, the precision requirement is general, in the machinery industry belongs to the relatively simple parts. However, the valve core sealing parts of the manufacturing requirements are extremely high, must achieve zero-to-zero sealing coincidence in order to meet the zero leakage requirements of the gas-tightness test. Therefore, the valve manufacturing process is actually quite complex and technically difficult, with the following characteristics.

① The choice of materials is demanding.

Due to the wide range of applications, valves need to be used in high temperature and high pressure, low temperature and deep cold, flammable and explosive, toxic, corrosive and other harsh conditions, the material puts forward very high requirements. In addition to commonly used cast iron, carbon steel, etc., but also widely used stainless steel, alloy steel, titanium alloys and other high-alloy materials. These high-alloy materials casting, welding and processing performance are poor, to the manufacturing process brings great difficulties.

② The casting process is complex.

Most of the valves using complex structure of the thin shell castings, not only the appearance of higher quality requirements, internal quality and metallurgical structure must also reach a high standard, there can be no porosity, shrinkage and other defects. Therefore, its casting process is much more complex than the general mechanical parts.

③ Difficulty in machining.

Most of the high-strength, high hardness, high corrosion-resistant valve material cutting performance is poor, it is difficult to achieve the required dimensional accuracy and finish. In addition, the valve sealing surface machining accuracy, fit angle, finish requirements are also very high, bringing great challenges to machining.

④Valve parts are also difficult to clamp on machine tools.

Valve main parts such as valve body, gate and other structures and shapes are more complex, some parts belong to the thin-walled, elongated parts, rigidity is poor, positioning and clamping in the machine tool processing is more difficult, the need to use more complex special jigs and fixtures.

⑤ Complicated process arrangements.

On the surface of the valve parts number of small, simple structure, but the core sealing part of the flatness, finish, hardness requirements are extremely high, the two-sealing surface of the coincidence must reach zero to zero. This rough benchmark to ensure precision sealing requirements, is the biggest process difficulties in the manufacture of valves.

⑥ The test inspection dangers are hidden.

Valve as a pressure pipeline opening and closing and regulating elements, need to be used in a variety of harsh operating conditions. However, the test can only be carried out at room temperature, cannot fully simulate the actual working conditions, there are major hidden dangers.

In summary, the valve manufacturing process is complex, technically difficult, is a major challenge in the field of machinery manufacturing. Only fully aware of these characteristics, and take targeted manufacturing technology to ensure the quality and reliability of valve products.

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: