Common Problems

One-stop Solution for Valve Products

Common Assembly Methods for Valves


Release time:

Aug 18,2024

The common assembly methods of  Valves have three kinds: complete interchangeable method、repair method and selection and matching method.

(1) Complete interchangeable method

When valve assembly adopts the complete interchangeable method, each part of the valve does not have to go through any trimming and selection can be assembled, assembled products that can meet the specified technical requirements. At this time, the valve parts should be processed in full accordance with the design requirements to meet the requirements of dimensional accuracy and form and position tolerances.

The advantages of the complete interchangeable method are: assembly work is simple, economic, workers do not need a high level of technology, assembly process of high productivity, easy to organize assembly line and organization of specialized production, but relatively speaking, the use of complete interchangeable assembly, for the parts of the machining accuracy requirements are higher. Applicable to globe valves, check valves and other relatively simple structure of the valve class and medium and small diameter valves.

(2) Selection and matching method

Valve assembly using the selection and matching method, the parts can be processed according to the economic accuracy, assembly and then a certain adjustment, compensation function of the size of the selection, in order to achieve the required assembly accuracy. The principle of the selection and matching method is the same as the repair and matching method, only in the method of changing the size of the compensation parts is different. The former is to change the compensation part size by selecting fittings, and the latter is to change the compensation part size by trimming fittings. For example: double gate wedge gate valve top core and adjusting gasket, adjusting gasket between the two bodies of the folio ball valve, etc., is in the dimensional chain related to assembly accuracy to select special parts as compensation, by adjusting the thickness of the gasket size, to achieve the required assembly accuracy. In order to ensure that in different cases can be fixed compensation parts for selection, it is necessary to pre-production of a set of different thickness size of the gasket, bushing compensation parts, for assembly selection.

(3) Repair method

Valve assembly by repair method, the parts can be processed according to the economic precision, and then trimmed to a certain size with adjustment and compensation function when assembling, in order to achieve the specified assembly purpose. Such as the gate valve gate and valve body, due to the realization of the interchangeable requirements of the processing cost is too high, the majority of manufacturers are used to repair the process. That is, in the final grinding of the gate sealing surface control open size and the valve body sealing surface of the open size to match the method of ‘matching plate’ to achieve the final sealing requirements. Although this method increases the ‘match plate’ process, but greatly simplifies the dimensional accuracy requirements of the previous processing procedures, ‘match plate’ process of skilled operation, overall does not affect the production efficiency.

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: