Zhengzhou Success Machinery Co.,ltd - Professional valve manufacturer
Precautions to be Taken When Repairing Ball Valves
Release time:
Aug 07,2024
Precautions to be taken when repairing ball valves
(1) It must be ascertained that the pressure has been removed from the pipeline upstream and downstream of the ball valve before dismantling and disassembling operations can be carried out.
(2) When disassembling and reassembling, care must be carefully taken to prevent damage to the sealing surface of the parts, especially non-metallic parts, and it is advisable to use special tools to remove the O-ring.
(3) The bolts on the flange must be tightened symmetrically, gradually and evenly during assembly.
(4) cleaning agent should be compatible with the rubber parts, plastic parts, metal parts and working medium (such as gas) in the ball valve. When the working medium is gas, available gasoline (GB484-89) cleaning metal parts. Non-metallic parts with pure water or alcohol cleaning.
(5) Individual parts that have been disassembled can be cleaned by immersion washing. Metal parts that are not broken down can be scrubbed with a clean, fine silk cloth impregnated with detergent (to avoid fibre shedding and adhering to the parts). All grease, dirt, glue, dust, etc. adhering to the wall surface must be removed during cleaning.
(6) Non-metallic parts should be removed from the cleaning agent immediately after cleaning and should not be immersed for a long time.
(7) After cleaning, you need to wait for the cleaning agent to evaporate (can be wiped with a silk cloth not soaked in cleaning agent) for assembly, but shall not be left for a long period of time, otherwise it will rust and be contaminated by dust.
(8) New parts also need to be cleaned before assembly.
(9) Use grease lubrication. The grease should be compatible with the ball valve metal materials, rubber parts, plastic parts and working medium. Apply a thin layer of grease on the surface of the seal mounting groove, a thin layer of grease on the rubber seals, and a thin layer of grease on the sealing and friction surfaces of the valve stem.
(10) The assembly shall be free from metal shavings, fibres, grease (except those specified for use) dust and other impurities, foreign matter, etc. contaminating, adhering to or remaining on the surface of the parts or entering the inner cavity.
keywords
Follow Us
Zhengzhou Success Machinery Co.,ltd
TEL:+8618595868771
E-mail:sales@successmach.com
Address:98-1 Dengfeng Road, Shangjie District, Zhengzhou City, Henan Province