Zhengzhou Success Machinery Co.,ltd - Professional valve manufacturer
Gate valve disassembly and cleaning methods and steps
Release time:
Aug 02,2024
Gate valve disassembly and cleaning methods and steps
一、Preparations
1、according to the required specifications of the valve selected spanners, screw spinners, pry bars, force bar, top wire and other tools.
2、Prepare appropriate amount of cotton yarn, detergent, according to the valve specifications to prepare the valve end sealing gasket, packing, lubricating oil.
二、 Operational steps
1、Operate the valve to the fully open position.
2、Truncate the control valve before and after the removed gate valve, and empty the remaining medium in the pipe.
3、Dismantle the flange bolts connecting the gate valve and the pipeline with a spanner, and use a sling to tie down the appropriate part of the gate valve, and then use suitable lifting equipment to lift up the gate valve.
4、Dismantle the middle flange, and then check and clean the valve cavity, gate plate, stem head, and the middle flange sealing gasket, etc..
5、Worn out middle flange sealing gasket needs to be replaced, and apply a layer of grease on both sides of the sealing gasket before installation. Before installation, apply a layer of grease on both sides of the gasket.
6、After cleaning, put the valve stem into the gate, align the gate guiding groove with the valve body guiding rib, load the valve body, turn the handwheel, make the two middle flanges close to the right, load the bolts, and tighten the nuts diagonally.
7、Commissioning is completed, the valve according to the corresponding test procedures for the pressure test.
8、Pack up the tools, clean up the scene.
三、Technical requirements
1、When disassembling, it is forbidden to collide with the sealing surface of the gate and seat, and pay attention to the direction of the mounting surface of the gate, which can be marked before disassembling.
2、All the parts should be cleaned thoroughly.
3、Each part should be ensured to be loaded in its original state as far as possible, and adjusted to a reasonable position.
keywords
Follow Us
Zhengzhou Success Machinery Co.,ltd
TEL:+8618595868771
E-mail:sales@successmach.com
Address:98-1 Dengfeng Road, Shangjie District, Zhengzhou City, Henan Province