Common Problems

One-stop Solution for Valve Products

What are the three eccentrics of a triple eccentric butterfly valve?


Release time:

Jul 08,2024

   The three eccentrics of a triple eccentric butterfly valve, as shown above, are described as follows:

First Eccentric a :Between Centerline of The Shaft Hole and Median line of The Body Seat

Second Eccentric b:Between Centerline of The Shaft Hole and Centerline of The Body

Third Eccentric β:Between Centerline of The Body and Centerline of Seat sealing Surface

    The sealing principle of the triple eccentric butterfly valve is based on the double eccentric seal butterfly valve, and the seat sealing surface center line forms a β angle with the center line of the valve body. This structure makes the valve sealing surface basically frictionless when opening and closing, with the increase of closing pressure, the valve is tighter and tighter, when the triple eccentric sealing butterfly valve is in the fully open state, the sealing surface of the valve plate will be completely detached from the sealing surface of the valve seat, this design not only fundamentally changes the sealing structure, to achieve the torsion sealing, which does not rely on the elasticity deformation of the valve seat, but relies entirely on the compression of the valve seat contact surface to achieve the sealing effect. Sealing effect. Metal hard seal valve seat is usually used to solve the problem of high temperature resistance.

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: