Common Problems

One-stop Solution for Valve Products

The common faults、causes、 repair methods of the pressure reducing valve


Release time:

Jun 19,2024

The pressure reducing valve is a kind of fluid control device, the main function is to protect the pipeline and equipment from being damaged by excessive pressure by regulating the pressure of the fluid. In the piping system or equipment, if the fluid pressure is too high, it will easily lead to the damage of pipeline and equipment, and even endanger personal safety. Therefore, in this case, the pressure reducing valve is particularly necessary!

Common faults:
1、The pressure behind the pressure reducing valve is unstable;
2、The valve is blocked;
3、The valve cannot be sealed.
4、The pressure after the valve cannot be adjusted;

Causes of faults:
1、The size of the pulse-type pressure reducing valve is not appropriate, the valve's pressure at both ends of the media are difference;
2、The regulating spring of the spring-loaded pressure reducing valve has been incorrectly selected or spring breakage, unstuck;
3、The valve's control channel is blocked by debris;
4、The piston rust stuck, it cannot move down from the highest position 
5、The valve cover has leakage, it cannot maintain pressure;
6、Piston and cylinder wear or corrosion;
7、The valve body is full of condensate;

Repair methods:
1、Replace the pressure reducing valve with suitable size;
2、Replace the regulating spring;
3、Remove debris, and install the strainer before the valve ;
4、Overhaul the piston, make it flexible;
5、Overhaul the valve cover or replace the gasket;
6、Overhaul the cylinder, replace the piston ring;
7、Loosen the silk plug, drain the condensate;


 

 

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: