Common Problems

One-stop Solution for Valve Products

Why did gate valve opening and closing inflexible?


Release time:

May 17,2024

Reason:
1、Valve stem was twisting.
2、The machining accuracy of the stem threads did not meet the standard requirements.
3、 Excessive force severely damaged the threads During the switching process.
4、Stem nut was placed tilting.
5、The threads of the valve stem were corroded by the medium.
6、Same choice of the material of stem and nut chosen the same and caused hold-ups between both.

Solution:
1、Controlling the effort of opening and closing and did not forcibly twist the valve stem.
2、The quality of processing was strictly controlled and must be in accordance with the relevant regulations.
3、Careful handling, no forceful opening and closing. Reversing the handwheel two turns after the switch was in position to ensure that the top side of the threads fitted perfectly.
4、Replacing the stem nut so it was horizontal and vertical.
5、Changed the stem nut or cleaned the threads of the valve stem.
6、If the stem nut was copper,the stem must be not copper,You can't use the same material for both.

keywords

Previous Page:

:Next Page

Previous Page:

Next Page: