Zhengzhou Success Machinery Co.,ltd - Professional valve manufacturer

Categories

E-mail:

Address:98-1 Dengfeng Road, Shangjie District, Zhengzhou City, Henan Province

Rubber elbow Flexible rubber elbow

The rubber elbow is commonly used in pipeline turns to change the direction of the pipeline fittings, at the same time has the characteristics of pipeline vibration and noise reduction, compensation for displacement. According to the different angle size is roughly divided into 45-degree elbow、 90-degree elbow and so on. We have a professional and experienced service team, and our cooperation will take your career to a higher level.

Category：

Pipe Fitting

E-mail:

sales@successmach.com

Inquiry

Recommend

Description

Name	Rubber elbow
Size	DN50-DN1800
Pressure	PN10-PN25
Design standard	DIN3201-F1 PN16
Flange drilled standard	DIN2533-PN16
Flange	RF Flange/Ductile iron
Body	Rubber+Polyester cord fabric
Coating	FBE above 250um

Rubber elbow is a high elasticity, high airtightness, media resistance and weather resistance of the pipeline connection parts. The product makes use of the elasticity of rubber, high airtightness, media resistance, weather resistance and radiation resistance and other advantages, the use of high-strength, cold and heat stability of polyester cord fabric crosswise and its composite, after high-pressure, high-temperature mould vulcanization and become. Commonly used in pipeline turns to change the direction of the pipeline fittings, at the same time has vthe characteristics of pipelineibration and noise reduction, compensation for displacement. According to the different angle size is roughly divided into 45-degree elbow, 90-degree elbow and so on. According to the pipeline installation requirements, can also be customised to the corresponding angle of the elbow.

The 45-degree elbow is not easy to clog, and the impact of the water flow in the falling water is smaller, resulting in less noise, and at the same time, its pressure-bearing is better, it is less likely to be damaged by the larger water flow.

So the choice of 45-degree elbow or 90-degree elbow depends mainly on the specific needs of the pipework system and the installation environment, including whether a right-angle turn is required, whether clogging, noise and pressure-bearing properties are considered, and other factors.