Zhengzhou Success Machinery Co.,ltd - Professional valve manufacturer
News Events
Latest News
What is non-destructive testing? What kinds of non-destructive testing of valves are included?
Release time:
Mar 11,2025
What is non-destructive testing? What kinds of non-destructive testing of valves are included?
一、What is non-destructive testing?
Non-destructive testing, abbreviated as NDT (Non - Destructive Testing), is also known as non-destructive flaw detection . The American Society for Nondestructive Testing defines NDT as “the determination of the physical state of an object without affecting its ability to fulfill its intended function.”
Simply , nondestructive testing is in the absence of damage or does not affect the use of the performance of the object being tested under the premise of the use of physics, chemistry, materials science and engineering and other principles, with the help of advanced technology and equipment, the internal and surface defects, geometric features and dimensions, physical properties and state of the valve detection of technical means.
In all aspects of industrial production, nondestructive testing plays an indispensable role. In the product design stage, it can help engineers to assess the performance of materials to ensure the selection of suitable materials for valve manufacturing; in the processing and manufacturing process, non-destructive testing can be real-time monitoring of the production process, timely detection of processing defects, to avoid the generation of unqualified products, and effectively reduce production costs.
Finished product inspection, through non-destructive testing can strictly control product quality, only meet the quality standards of the valve to enter the market; for the valve in service, regular non-destructive testing can be timely detection of valves in the use of the process of the problem, in order to timely repair or replacement, to protect the safety of industrial production, stable operation.
二、Five conventional testing methods
Nondestructive testing technology is a wide range of types, including ray detection (RT), ultrasonic testing (UT), eddy current testing (ET), magnetic particle testing (MT) and penetration testing (PT) is the most commonly used five conventional testing methods , each of them has a unique detection principle and scope of application, like a group of well-trained “scouts”, from the Different angles of the valve for a full range of “reconnaissance”.
This article focuses on RT,Other non-destructive testing methods will be introduced in subsequent articles.

Radiographic testing (RT): the “seeing eye” for internal defects
Ray detection is like giving the valve to do “X-ray fluoroscopy”, the use of rays (such as X-rays, γ-rays) can penetrate the characteristics of the object, when the intensity of a uniform beam of rays through the irradiation of the valve, if the valve local area of the presence of defects (such as porosity, slag, shrinkage, etc.), due to defects in the parts and intact parts of the ray of the attenuation of the different degrees. The intensity of the transmitted ray will also produce differences.
The film is placed in the appropriate position so that it is sensitized under the action of the transmission ray, after darkroom processing to get the negative, the ray penetrates the workpiece, due to defects in the parts and intact parts of the intensity of the transmitted rays are different, the corresponding parts of the negative will appear on the blackness difference. By observing the change of blackness on the negative, the inspector can accurately determine the location, size and nature of the defects like a doctor interpreting an X-ray film.
Radiographic defects are categorized into defect type and severity. These are shown in the actual reference radiograph books published by ASME. The severity levels range from Class I (no defects) to Class V (numerous defects). All of these are within the specified geometric areas. In addition, B16.34 lists locations on valve components that should be radiographed and graded; these are called critical areas. When defects are observed on radiographs outside of these areas, grading only these critical areas can be problematic. Technically, this area cannot be evaluated because it is located outside of the critical areas, even if the defect is very severe.
In an effort to minimize the number of out-of-range defects that may be acceptable, many end users require 100% RT of pressurized components (i.e., valve bodies and bonnets.) This eliminates the possibility of overlooking or missing defects outside of the critical areas.
Radiographic inspection is particularly suitable for detecting internal defects in castings and welds, and has a high sensitivity to volumetric defects (such as porosity, slag, etc.). In the production of some large cast steel valves, ray detection can clearly show whether there are shrinkage holes, porosity and other defects within the casting to ensure the quality of the valve.
However, ray detection also has some limitations, it is the detection rate of crack defects affected by the angle of illumination, and the detection cost is higher, the detection speed is slower . Since the ray is harmful to the human body, the detection process needs to take strict protective measures, such as the use of lead shielding, wearing a personal dosimeter, etc., to ensure the safety of inspectors.
keywords
Previous Page:
Previous Page:
Follow Us
Zhengzhou Success Machinery Co.,ltd
TEL:+8618595868771
E-mail:sales@successmach.com
Address:98-1 Dengfeng Road, Shangjie District, Zhengzhou City, Henan Province